www.rcracing.co.nz

Capital Model Racers Forums
It is currently Wed Oct 23, 2019 9:34 am

All times are UTC + 12 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Thu Oct 16, 2008 8:05 pm 
Offline
is new to all this
User avatar

Joined: Fri Oct 10, 2008 8:31 pm
Posts: 5
Hi

I had a Futaba receiver that I conected the power around the wrong way. I now have another one Futaba two channel receiver. Model Number:FP-R2Gs which I got off Trademe and dont have any info
and wondering if anyone knows what way the power goes around. ie what the pin conections are.

there is no markings saying on the platic or the board.

Thanks Steve


Top
 Profile  
 
PostPosted: Thu Oct 16, 2008 9:03 pm 
Offline
has too much spare time
User avatar

Joined: Tue Sep 16, 2008 7:34 pm
Posts: 289
Location: East Coast US
The case should have a cutout for the plug to go in. On one side of the cutout there should be a smaller tab cutout. The black wire goes furthest from that tab.

Image

wire color order from closest to tab to furthest:

white(signal) red(+) black(-)

or alternatively on some model servos

orange(signal) red(+) brown(-)

Image

Even if your plugs have no tab, follow this for Futaba servos and receivers. If you are using a non-Futaba servo make sure the wires are in the correct orientation.

_________________
"These go to eleven."


Top
 Profile  
 
PostPosted: Fri Oct 17, 2008 7:06 am 
Offline
is new to all this
User avatar

Joined: Fri Oct 10, 2008 8:31 pm
Posts: 5
Thanks very much


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC + 12 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group